Chevrolet Cruze Infotainment system User Manual page 82

82 Infotainment System
To Transfer Audio to the Bluetooth
System from a Cell Phone
Use the audio transfer feature on
the cell phone. See your cell phone
manufacturer's user guide for more
information. Press the Transfer Call
button on the screen or press and
hold the / button on the
steering wheel.
Dual Tone Multi-Frequency
(DTMF) Tones
The in-vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu-driven
phone system.
Using the Infotainment Controls
1. Turn and press the MENU/SEL
knob and select Enter Number.
2. Enter the phone number,
or select Enter Number on the
screen and select digits, then
press OK.
Hands-Free Phone
Using Bluetooth Voice
Recognition
To use voice recognition, press the
/ button on the steering wheel.
Use the commands below for the
various voice features. For
additional information, say Help
while in a voice recognition menu.
Making a Call
Calls can be made using the
following commands.
Dial or Call: These commands can
be used interchangeably to dial a
phone number.
Digit Dial: This command allows a
phone number to be dialed by
entering the digits one at a time.
Redial: This command dials the
last number used on the cell phone.
Using the Dial or Call
Command
To call a number:
1. Press / . The system
responds Please Say a
Command, followed by a tone.
2. Say Dial or Call.
3. Say the entire number without
pausing, followed by Dial.
Once connected, the person called
will be heard through the audio
speakers.
To call using a name tag:
1. Press / . The system
responds Please Say a
Command, followed by a tone.
2. Say Dial or Call and then say
the name tag. For example Call
John at Work.
Once connected, the person called
will be heard through the audio
speakers.