Table of Contents
Advertisement
3
Camera Overview
1. Camera Lens: The camera has separate lenses for day/night use.
2. Light Detector: Allows the camera to detect light levels to switch between day/night
use automatically.
3. Microphone: Enables 2-way audio.
4. Infrared LED: Allows the camera to see in the dark.
5. CamID Label: Shows the camera's CamID number and a QR code for easy setup.
6. NET: Connect an Ethernet cable and connect the other end to your router (not
included).
7. Speaker: Enables 2-way audio and alarms.
8. DC: Connect the included power adapter.
9. Reset Button: While the camera is powered on, press with a pin or small object for at
least 4 seconds to reset the camera to factory defaults. This is useful if you have for-
gotten the password for the camera.
10. microSD Card Slot: Insert a microSD card (not included) to enable recording on the
camera. Camera supports microSD or microSDHC cards up to a maximum size of
32GB.
11. SD Indicator Light: Glows when a microSD card (not included) is inserted. Flashes
during recording.
12.
/ Network Indicator Light: Glows when connected to an Ethernet or WiFi net-
work. Flashes when sending or receiving data.
13.
/ Status Indicator Light: Glows when camera is connected to the Internet. Flashes
when there is a connection problem.
#LX400063; r. 1.0/26005/26005; en-US
3
Advertisement
Table of Contents
