Prioritize A Channel In A Scan List - Motorola CM300 User Manual

PRIORITIZE A CHANNEL IN A SCAN
LIST
You may want to check the activity on one or
two channels more frequently than others. You
can do this by prioritizing them:
Priority Channel Scanning Sequence
None specified Ch1 Ch2 Ch3
Ch4 ...Ch1
Channel 2 Ch2 Ch1 Ch2 Ch3
(Priority 1)
Ch2 Ch4 Ch2 ...Ch1
Channel 2 Ch2 Ch1 Ch8 Ch3
(Priority 1) and
Ch2 Ch4 Ch8 ...Ch1
Channel 8
(Priority 2)
Note: If you are receiving on a non-priority
channel and traffic becomes active on a
priority channel, your radio will automat-
ically switch to that priority channel and
indicate the activity with a short tone.
Set Priority Channels
Note: You cannot have the same priority on
two different channels.
D
1 to enter menu mode.
G H
2 or until
D
3 to select
G H
4 or until
D
5 to select
G H
6 or until
D
7 to select
G H
8 or until
– or – until
D
9 to select the desired priority level.
You see the current priority channel.
G H
10 or until you see the channel you want
to prioritize.
PROG LST
PROG LST
SCAN LST
SCAN LST
EDIT PRI
EDIT PRI
PRI #1
PRI #2
31
English