Call And Alert Tones; Transmitting Messages - Motorola 6880906Z72-O Operator's Manual

C a l l a n d A l e r t T o n e s
The four Call Tones on the Spirit GT radios are used to alert other radio
users of an incoming transmission on the same frequency and code. They
are set at a fixed minimum volume level, but Call Tones become louder as
volume increases.
Alert Tones (beeps) confirm radio functions. Alert Tones can be disabled.
When Alert Tones are disabled, the radio will receive messages at the
volume setting you've selected, but you will not hear beeps when you press
control buttons.
1. With radio on, press the Menu button
once. Call Tone number flashes.
Figure 15.
2. Use Scroll button to select one of the
four Call Tones.
1. Turn the radio off.
2. Hold down the Monitor button while
you turn radio on again.
3. To re-activate Alert Tones, turn the radio off, then on again
while holding the Monitor button down.
Check frequency activity by pressing Monitor button. You'll hear static if
frequency is clear to use. Don't transmit if frequency is in use.
1. To transmit, press Push-To-Talk and speak into radio.
2. The LED Indicator Light will glow continuously when transmitting.
1. To receive messages, release the Push-To-Talk button.
Figure 15.