Creating a User profile
Select
Create profile
sensors and touch OK.
Letters will appear in the display that
you can select with the arrow sensors.
You can use the arrow sensors to select
from numbers, upper case and lower
case letters.
Touch the arrow sensors to
select the first character and then
touch OK.
The character will then appear in the
line above.
Repeat the process until the required
name appears in the display line
above.
Useful tip: If you make a mistake,
select the sensor to delete the last
character.
When you have finished entering a
name and want to save it,
use the arrow sensors to
highlight the tick and touch the OK
sensor.
If you do not want to save what you
have entered,
touch and hold until all characters
have been deleted and the coffee
machine jumps back to the previous
menu.
The last created profile is selected as
the current profile.
with the arrow
Selecting a User profile
This selection is only possible if a
profile has been allocated in addition
to the Miele standard profile.
Use the arrow sensors to select
and touch OK.
Select profile
Select the required profile with the
arrow sensors and touch OK.
The name of the current User profile is
shown in the top left of the display.
Changing a User profile name
This selection is only possible if a
profile has been allocated in addition
to the Miele standard profile.
Select
Change name
sensors and touch OK.
Proceed the same as with "Create
profile":
– Select to delete a character.
– To enter new characters, select the
relevant character and confirm with
OK.
– Save the new name by selecting in
the display and touching OK.
User profiles
with the arrow
41