Back Panel Connections - Motorola DSR470 User Manual

4. Go Back.
viewed.
5. Menu.
Press this key to display the Menu screen. Press it again to turn off
the Menu and return to CBL mode. Press this key to control the receiver if you
cannot find your remote control.
6. Enter.
Press this key to select a highlighted menu option.
7. Arrow Keys.
The k eys are also used to change the channel or to move up and down on the
L
menu screen. Use the

Back Panel Connections

The following back panel descriptions are for reference only. Check with your
dealer and/or system installer for specific details.
1. Power.
The power cord is attached here.
2. Cable In.
3. CH3 CH4.
your TV to receive broadcasts. The settings should be the same as the TV setting
for use with your VCR (usually channel 3). Your installer should discuss this with
you.
4. Antenna In.
5. Out To TV.
6. Audio Out (L & R).
connect your TV and VCR.
7. To TV.
This is a standard video output terminal.
DSR470 User Guide
Press this key to return to a previous menu or the last channel
Press these keys to highlight selections from menu screens.
k eys to move right or left on the menu sceen.
! "
This connects your cable TV service to your system.
This switch determines the channel (3 or 4) to which you set
This is an off-air antenna terminal.
This supplies the VHF signal to your TV.
These are audio outputs that may be used to
Installation
33