Working With Detergents - Kärcher K 5.20 M Operator's Manual

WORKING WITH DETERGENTS

Detergents can only be applied at low pressure (Mix).
Step 1
Install the Vario spray wand. Set the Vario
spray wand to the low pressure setting (mix)
by turning the wand collar. The wand must
be set in the low pressure (Mix) position to
apply detergents.
Step 2
Fill a container with Karcher detergent.
Place the filter end of detergent suction
tube into the container.
Caution
Never use:
• Bleach, Chlorine products and other
corrosive chemicals
• Liquids containing solvents
(i.e., paint thinners, gasoline, oils)
• Tri-sodium phosphate products
• Ammonia products
• Acid-based products
These chemicals will harm the unit and
will damage the surface being cleaned.
Step 3
Turn on the pressure washer.
Pull trigger to operate unit: Liquid detergent
is drawn into the unit and mixed with water.
Apply detergent to work area. Do not allow
detergent to dry on surface.
For best results see Cleaning
Tips on pages 8 & 9 for specific
information on how to clean
different surfaces.
Always Use Karcher
Detergents for Best Results.
Karcher biodegradable detergents
are"specially formulated to protect the
environment and your pressure washer.
Special formula won't clog the suction tube
filter and will protect the internal parts of the
pressure washer for a longer life. For
Karcher Detergents, check your retailer or
visit our website:
www.soappac.com
7