Led Blinks 6 Times; Sc Energy Recovery Sos - Panasonic TH-42PZ80U Technical Manual

Trouble Mode

SC Energy Recovery SOS

Replace
the SC board
Clean and reseat the ribbon
cables between the D and the C
boards. Also reseat the cables
between the C boards. If
problem persists, replace the D
board

LED blinks 6 times

Defective Board (Possibility)
SC, P Board (SC >D> P )
Disconnect
connectors SC2, and SC20
from the SC board. Plug in
the TV and turn it on.
Does the
Yes
TV power
up and
stay on?
Does the P
board output
15V at pin 1 of
Yes
P7 and Vsus at
pin 1 of CN P2
before the TV
shuts down?
19
Warning: Disconnect AC Power prior to making any
disconnection or connection
(*2) CAUTION: Before connecting P2/SC2 or
P11/SS11, discharge is necessary to prevent
potential shock caused by VSUS.
No
Connect SC2
SC20. Plug in the TV
and turn it on.
No
Replace
the P board
(*2) and