Polaris xp 2013 eps Service Manual page 108

ENGINE / COOLING
8. If the crankshaft gear (S) is damaged, the crankshaft
assembly must be replaced.
9. If the auxiliary sprocket (T) is damaged, remove the
sprocket with a 3-jaw puller.
10. Using an arbor press, install new sprocket in any
orientation to the depth shown in the following
illustration.
Auxiliary Sprocket Installed Depth:
1.0551 ± .0039 in. (26.8 ± 0.1 mm)
3.50
1.0551 ± .0039 in.
(26.8 ± 0.1 mm)
= In. / mm.
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
11. Support crankshaft on V-blocks or on-centers in a
crankshaft stand or lathe. Measure crankshaft runout
and replace if runout exceeds maximum listed below.
Crankshaft Maximum Runout:
.001 in. (0.025 mm)
12. Visually inspect surface of crankshaft main and
connecting rod journals. Replace crankshaft if any
journal is scratched or pitted.
= In. / mm.