Mounted Configuration - Motorola Symbol LS7708 Quick Reference Manual

Quick Reference Guide
Tilt the plastic tab into the slot on the scanner, and rotate the opposite edge
4.
downward. As the bracket rotates, push it toward the slot so that the feet of the
bracket lie flat against the scanner's bottom (see arrows).
When the bracket is flat against the scanner bottom, release pressure so that
5.
the feet slide forward into the front of the scanner.

Mounted Configuration

Use this method if the scanner will be secured to a mounting surface.
Determine where the LS7708 is going to be mounted.
1.
Use a pencil to mark the four mounting holes. (A mounting template is provided
2.
in the LS7708 Product Reference Guide.)
Remove all rubber feet (from the bracket or from the scanner).
3.
Place the mounting bracket in position over the drilled holes with its flat surface
4.
facing the mounting surface.
7