Talking And Listening; Setting The Channel; Setting The Code; Features - Motorola CLS446 User Manual

Talking And Listening

Your radio has 8 channels and 121 interference eliminator
codes. If you are in a group and you wish to talk to each
other, all radios must be set to the same channel and
interference eliminator code. If you experience
interference and need to change channel, ensure that you
change the channel of all radios in your group.
Before talking, please remember to monitor the channel,
as described previously. Then press and hold the Push to
Talk (PTT) button. When you are finished talking, release
the PTT button and the radio will beep (if the talk
confirmation tone is enabled). For maximum clarity, hold
the radio 5 to 7 cm away from your mouth and speak
directly into the microphone. Do not cover the microphone
while talking.

Setting the Channel

• Press S until the channel number flashes.
• Press ] or [ to select a channel.
• Press PTT to confirm.

Setting the Code

• Press S until the code number flashes.
• Press ] or [ to select a code.
• Press PTT to confirm.
12
You can specify a different code for each channel
• To set a channel and code combination, press S and
then press ] or [ to select the channel.
• Press S again and then press ] or [ to select a code.
• Press PTT to exit the menu and to save the channel and
code combination.

Features

Hands Free Use (VOX)

VOX allows you to transmit "hands free" by talking while
using VOX accessories connected to the radio. A VOX
compatible headset is supplied with your radio.
Note: When using audio accessories with your radio, turn
the volume of your radio down before you place the
accessory on your head or in your ear.
To Use The VOX Feature:
• Switch off your radio.
• Open the accessory cover and insert the audio accessory
into the accessory jack. If the VOX icon g is flashing and
you are setting up VOX for the first time, set the VOX
sensitivity level (please see below).
• Switch on your radio. The g icon will appear in the
display to indicate that the VOX feature is active.
• To transmit, speak into the accessory microphone. To
receive, stop talking.