Using The Hdmi® Settings Feature; Hdmi ®1(2, Or 3) Rgb Range; Hdmi ® Information Display - Toshiba 65L5400U Instruction Manual

SettingupyourTV 97
!sing the HDM[_R;settings jedure
Using theHDlVll ®settings f eature
HDiVU ®1(2,or3) RGBRange
You can select RGB range of HDMI inputs from the following
modes, as described below:
Mode
A,,,,,,u,_!o( default)
Full
Limited
1 From the Options menu, highlight Input Options, and then
press the OK button.
2 Highlight HDMI 1(2, or 3) RGB Range and then press the OK
button.
Press the A/V (arrow) buttons to select Auto, Full, or
Limited, and then press the OK button.
Deserit)tiol_
Adjus!sRGB,,,!,uo!,!_ng,,e s),gnal automatically, ...........................................
RGBinputsignalis displayed in therange from 0 to 255.
RGBin efrom 16 to 235.
The HDMI '_setting (RGB Range) needs proper HDMI '_source
devices. If your HDMP' source device does not support these
features, the TV may not work properly when this feature is enabled.
HDiVU ®InformationDisplay
Viewing the HDMP' signal information:
1 From the Options menu, highlight HDMI Information
Display, and then press the OK button.
2 Press the A/V (arrow) buttons to select On or Off, and then
press the OK button.
3 When the HDMI Information is set to On, pressing the INFO
button displays the HDMI Information banner (Resolution,
Scan Type, Frame Rate, Aspect, Bit Depth, Color Space, RGB/
YUV, Chroma Format). When the HDMI Information is set to
Off, the normal banner is displayed.
NOTN
¢ Thesignalinformation bannerwill a ppear w henthis feature isset
toOn andyouwatchanHDMI ® inputandpress theINFO
button.Thesignalinformation will disappear a fter approximately
60 seconds.
¢ If youpress theINFObuttonwhenthis feature is setto Off, only
thenormal b anner will appear.