Operation; Changing Movie Image Quality - Canon PowerShot ELPH 180 User Manual

Changing Movie Image Quality

Two image quality settings are available. For guidelines on the total
recording time for movies at each level of image quality that will fit on a
memory card, see "Recording Time per Memory Card"
z z
Press the [ ] button, choose [
menu, and choose the desired option
(=
z z The option you configured is now
displayed.
z z
To restore the original setting, repeat this
process but choose [
Image Number of
Frame Rate
Quality Recording Pixels
1280 x 720 25 fps
640 x 480 30 fps
• In [ ] mode, black bars displayed on the top and bottom edges of the screen
indicate image areas not recorded.
Movies
(= 108).
] in the
21).
].
Details
For shooting in HD.
For shooting in standard definition.
Customizing Camera Operation
Customize shooting functions on the [
follows.
For instructions on menu functions, see "Using the Menu Screen"
Deactivating the Lamp
You can deactivate the lamp that normally lights up to help you focus in low-
light conditions when you press the shutter button halfway, or that lights up
to reduce red-eye when you shoot in low-light conditions with the flash.
z z Press the [
Setting] on the [
[Off]
z z To restore the original setting, repeat this
process but choose [On].
] tab of the menu screen as
(= 22).
Still Images
] button, choose [Lamp
] tab, and then choose
(= 22).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
35