Panorama Mode
Panorama Mode allows you to create
a panoramic picture. The camera will
automatically compose a panoramic picture
using the individual shots that you take.
Follow these easy steps to create a panoramic
picture:
1. Press the
mode (
).
2. Press the direction buttons to select a
shooting direction. (The right direction
is used as default if you do not make any
choice) 2 seconds later, the camera is ready
to take pictures. You can also press the
button or half press the shutter button to be
ready to take pictures.
3. Compose the first view of the panoramic
picture on the LCD and press the Shutter
button to capture the image.
4. After the first shot is taken, the
semi-transparent image of the first shot
will appear at the edge of the screen. You
can use this image to compose your picture
before you press the Shutter button to
capture and finish manual stitching.
24
button to select panorama
5. If continuous pictures are less than 4 shots,
press the
button, the camera will splice
the pictures automatically. Press playback
button to enter playback mode to see the
effect.
6. If you take 4 pictures, the camera will splice
the pictures automatically. Press playback
button to enter playback mode to see the
effect.