Add A Headset - AT&T TL96151 User Manual

Bluetooth
Bluetooth setup

Add a headset

Before you begin, make sure that your Bluetooth enabled headset is not
connected to any other Bluetooth device. Refer to your headset user's
manual to learn how to search for or add new Bluetooth devices.
To pair and connect a headset:
1. Press MENU
enter the main menu.
2. Press CID or
SELECT
press
3. Press SELECT
Press CID or
4.
press SELECT
followed by If headset is connected to cell, please
disconnect it.
• If there are already 4 paired devices on the device
list, the 4th one will be automatically removed,
regardless of whether the pairing of the new
headset is successful or not.
• If there is another headset already active, the screen
will show Only 1 headset in device list can be
ready for connection and prompts you to replace
an existing paired device.
• If there are already 2 active devices on the device
list with prefix D1: or D2:, the screen shows Only 2
devices can be ready for connection. The screen
prompts you to deactivate an active device.
5. Press NEXT
discoverable mode. Set your headset to discoverable
mode (refer to the user's manual of your headset),
NEXT
then press
• All devices that are connected to the telephone base
are temporarily disconnected.
6. The screen displays Searching for Bluetooth headsets....
7. When the screen displays the found devices, press
CID or DIR to highlight your headset and then press
8. Enter the PIN of your headset. The PIN for most Bluetooth devices is
0000 (refer to the user's manual of your headset). Then, press
on the telephone base in idle mode to
DIR to highlight Bluetooth, then
.
to choose Add device.
DIR to highlight Add headset, then
. The screen displays Please wait...
. The screen displays Pls set headset to
.
20
Directory
Cal ler ID log
Intercom
Bluetooth
BACK SELECT
BLUETOOTH
Add device
Device list
Download dir
BACK SELECT
DEVICE LIST
Add cel lular
Add headset
BACK SELECT
Pls set headset
to discoverable
mode
BACK NEXT
Searching for
Bluetooth
headsets...
FOUND DEVICES
Headset A
Headset B
BACK SELECT
ADD HEADSET
ENTER PIN
Active devices
_ _ _ _
BACK NEXT
SELECT .
NEXT .