Table of Contents
Advertisement
/
REMOVING THE BASE STAND
INSTALLING
: The LED D isplay i s v ery f ragile and m ust b e p rotected a t a ll t imes w hen r emoving t he b ase
WARNING
Stand
.
Be sure that no hard or sharp object or anything that could scratch or damage the LED display comes into
.
contact with it Do NOT exert pressure on the front of the unit at any time because the screen could crack
1 Disconnect all cables or cords connected to the unit
.
2 Lay the unit down on a flat surface with the back side facing down.
3 To remove the base stand loosen screws off the holes then pull downwards to release
the base stand
MOUNTING ON THE WALL
This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 16"
(400mm ) mounting kit designed for flat-panel TVs (not supplied). Mount this unit according to
the instructions included in the mounting kit.
Length of screw should not exceed 10 mm.
NOTE
Remove the base stand before mounting the unit on the wall.
16"
M6
WALL MOUNT INSTALLATION
,
11
.
Hide quick links:
Advertisement
Table of Contents
