Sony sl-hf600 Operating Instructions Manual page 54

SETTING A TITLE
1 Press
DATA SCREEN if the data screen display is
turned off.
2
TITLE INSEFIT.
3
RBSS CHECWPAGE until the desired page appears.
4
Press NEXT.
The cursor will blink on the screen.
Cursor
Select the background of characters by turning 5
JOG.
BACK
3-
$IZE
=
1
PAGE
2
'
with black outline
with black background
Then press NEXT.
6
select the character size by turning JOG.
Then press NEXT.
7 Set the characters one by one with JOG and NEXT.
(See "Usable characters" on page
55.)
Keep NEXT pressed to move the cursor
continuously.
24 char.
To create a title on another page, repeat steps 3 to 7.
8
After setting titles, press CHECKIPAGE so that the
title created blinks or press DATA SCREEN to turn
off the data screen display.
To change a pmet
character
d u r n setting
1 Press BACK to go back or NEXT to advance the cursor
to the position of the character to be changed.
2 Set a new character with JOG and press NEXT.
To erase a preset character during setting
1 Move the cursor to the position of the character to
be
erased with BACK or NEXT.
2
Press CLEAR to erase the character.
Keeping CLEAR pressed will erase the characters
continuously.
.To set a title on the Mack sawn
Before step 1 above, set BLACK SCREEN inside the front
panel to ON.
After setting the title, be sure to reset the switch to OFF.