Sony sl-hf600 Operating Instructions Manual page 29

REMOTE CONTROL OPERATION
ATTERY INSERTIOh
2
Insert three size AA
(IEC
designetlon
batteries
with
correct polarity.
1
3
Slide
and
close he lld
I
Battery life
In normal operation, batteries will last for three months.
When the batteries
are
exhausted, the JOG dlal and
S H U W ring on the Commander will not function, and
then the indicator will
rot
llght when the buttons on the
Commander are
pressed.
I f t h e ~ C o m m a n d e r b n o t t o b e ~ f o r a l o n g
perkd
o f
time, remove
the batteries to avdd posaibte
damage from battery leakage.
1
Select COMMAND MODE:
VTRl or VTR2
I
Remote sensor
I
2
Set to the same
Set to
position
as
that
on the VCR.
VTR.
Press the
buttons.
To
remotely
contrd the equipment wlthart the command
Inode selector
Set the command mode selector on the Remote
Commander as follows:
VTR1: for Sony Betarlax infrared remote control VCRs
for Sony 8 mm format VCRs
For Sony remote control TVs, either position will do.
To avoM having the SL-HF1000 and the other equipment
functioning simultaneously
Set the COMMAND MODE selector of the SL-HF1000 to a
different command mode position from the command
mode of the other equipment. Simply by switching the
command mode selector
on
the Remote Commander, you
can control two VCRs separately.
TocontrdSonyrematecontrolTVs
The buttons marked with an orange dot on the RMT-148
can be used to operate certain Sony remote control TVs.
To operate a TV, set the remote control TVNTR selector
on
the RMT-148 to TV. The functions of the buttons are limited
by the functions on the TV.
POWER Prsss to turn the power on and off.
MUTING: Press to mute the sound. Press again to
restwe the sound.
T V M R Press to select the input mode.
VOL +I-:
Press 'Y"
for more volume, and "-" for
less volume.
TIMERICH +I- and JOG: Select the channel.
DATA SCREW Press to retain or extinguish the on-
screen display.
Number buttons and ENTER: Select the channel.