Preparing The Parts - Samsung SHS-3320 User Manual

Preparing the parts

|
1. Adjusting the length of the dead bolt
2. Changing the faceplate of the dead bolt
Change the faceplate of the dead bolt following the size of a strike hole.
OR
Rectangle Strike hole
: No need to change.
3. Adjusting the length of the tailpiece
��� Tailpiece drawing
35mm
OR
35 40 45 50 55

Smart
Door Lock
Turn the body of the dead bolt to adjust the length
of the dead bolt.
It can be 60mm (2-3/8") or 70mm (2-3/4")
OR
How to cut
1. Press the V-cut line with pincers to make
more cut line.
2. Hold the end of the tailpiece with pincers.
3. Bend it up and down until it is separated.
- For more information, refer to page 31.
SHS-3320/3321
Round Strike hole
1. Remove the strike
faceplate with a
screw driver.
2. Turn the inner
faceplate to take
out it.
3. Insert the round
faceplate.