Features of your vehicle
Adjusting the driver and passenger
side temperature equally
1. Press the DUAL button again to
deactivate DUAL mode. The pas-
senger side temperature will be
set to the same temperature as
the driver side.
2. Operate the driver side tempera-
ture control button. The driver and
passenger side temperature will
be adjusted equally.
Temperature conversion
You can switch the temperature
mode from Centigrade to Fahrenheit
as follows:
While pressing the OFF button,
press the AUTO button for 3 seconds
or more.
The
display
will
change
Centigrade to Fahrenheit, or from
Fahrenheit to Centigrade.
4
140
✽ ✽ NOTICE
• If the battery has been discharged
or disconnected, the temperature
mode
display
Centigrade.
• If you re-connect the battery after
it has been completely discharged
or after it has been disconnected
from the vehicle, the system will
be initiated and the display will
first show 23°C (73°F) on the
screen which is the initial setting.
from
I n f o r ma t i o n P r o v i d e d b y :
Air intake control
■
Type A
will
reset
to
This is used to select the outside
(fresh) air position or recirculated air
position.
To change the air intake control posi-
tion, push the control button.
■
Type B
ORP042156