Kia 2016 Rondo Owner's Manual page 209

When there is a problem with the
motor to operate the wiper blades,
the wiper blades will stop and acti-
vate the Fail Safety Function in the
ignition switch ON position or while
driving. Fail Safety Function will
operate as follows:
- HI or Mode 2 (5 minutes) → LO or
Mode 1 (5 minutes) → INT or Mode
--- (5 minutes) → OFF or O (Stop)
CAUTION
If wipers do not return to normal
position, you should remove the
wax, water repellent, oil and other
debris into windshield and then
check wiper operation again.
I n f o r ma t i o n P r o v i d e d b y :
Features of your vehicle
CAUTION
After remove the overload con-
dition, if the problem of wiper
blades or operating the motor
remains, have the system be
checked by an authorized Kia
dealer.
❈ ❈ Overload condition
- In a rainy day when driving
through a long tunnel
- When wax car wash
- Water-repellent coating
(coated glass)
- Cleaning the windshield
cleaners
- Excessive blade wear etc.
4 113