Economy; Auto Review; No.reset; Reset - Panasonic DMC-TZ5 Operating Instructions Manual

5
Using SETUP menu
Preparations
Item
POWER SAVE

ECONOMY

OFF/2MIN./5 MIN./10MIN. :
Turn off LCD monitor
Automatically shut off power while not in use.
and power while not
in use to save battery
• To restore → Press the shutter button halfway, or turn on
consumption.
• Cannot be used in the following cases:
When using AC adaptor (optional), when connected
to computer/printer, during motion picture recording/
playback, during slideshows
• Settings fixed to '2 MIN.' in 'AUTO LCD OFF' (below),
'5 MIN.' in INTELLIGENT AUTO mode or CLIPBOARD
mode, or '10 MIN.' while slideshow is paused.
AUTO LCD OFF
OFF/15SEC./30SEC. :
LCD monitor is shut off if no operations are performed for
a set period while recording. (Status indicator is illuminated
while monitor is off.)
• Cannot be used in the following cases:
When using INTELLIGENT AUTO mode, CLIPBOARD
mode ,or AC adaptor (optional), when menu screen is
displayed, when using self-timer setting or during motion
picture recording.
• Monitor also shuts off during flash battery charging.
• To restore → Press any button.
OFF

AUTO REVIEW

1 SEC./2 SEC.: Automatically display for 1 or 2 seconds.
Automatically display
pictures immediately
HOLD: Auto review screen remains until a button (other
after taking them.
ZOOM: Displays for 1 second, then at 4x zoom for 1
• Fixed to '2 SEC.' in INTELLIGENT AUTO mode.
• In 'SELF PORTRAIT', 'HI-SPEED BURST', and 'MULTI
ASPECT ' scene modes, 'AUTO BRACKET', 'BURST'
mode, or pictures with audio, auto review performed
regardless of setting. ( DMC-TZ5/DMC-TZ15 only)
• Motion pictures cannot be automatically reviewed.
24
VQT1Q15
(Continued)
Settings, notes
the power again.
than the display button) is pressed
second
Item
ZOOM RESUME OFF / ON
Remember the zoom
• Cannot be set when using 'SELF PORTRAIT' scene
ratio when turning power
mode.
off.
YES / NO

NO.RESET

Reset image file
• The folder number is updated and the file number starts
numbers.
from 0001.
• A folder number between 100 and 999 can be assigned.
Numbers cannot be reset once folder number reaches
999. In this case, save all necessary pictures to your
computer, and format the built-in memory/card (P.27).
• To reset folder number to 100:
First, format the built-in memory or card, and reset the
file numbers using NO. RESET. Then, select 'YES' on the
folder number reset screen.
• File numbers and folder numbers. (P.82, 97)
RESET REC. SETTINGS?

RESET

YES/NO
Reset to the default
settings.
RESET SETUP PARAMETERS?
YES/NO
• Resetting SETUP parameters causes the following to be
reset:
Birthdays and names in 'BABY' and 'PET' scene modes,
'TRAVEL DATE', 'WORLD TIME', 'ZOOM RESUME',
'FAVORITE' in PLAYBACK menu (set to 'OFF'), 'ROTATE
DISP.' (set to 'ON').
• Folder numbers and clock settings will not be reset.
• Camera movement may be audible as the lens function is
reset. This is not a fault.

USB MODE

SELECT ON CONNECTION :
Select 'PC' or 'PictBridge(PTP)' each time you connect to a
Select communication
computer or PictBridge-compatible printer.
method for when
connecting camera to a
PictBridge (PTP) : Select when connecting to a
computer or printer with
USB connection cable.
PC: Select when connecting to a computer
Settings, notes
PictBridge-compatible printer
25
VQT1Q15