Table of Contents
Advertisement
PRM240i Wireless Modem User Manual ____________________________________________ Care & Maintenance
Getting Started
Setting up the Modem and iPAQ
Before using your non-rugged PRM240i modem, you must:
Install the modem software onto your iPAQ Pocket PC
Fit the external battery to the modem
Engage the iPAQ Pocket PC onto the modem
Fully charge the modem and iPAQ batteries
PRM240i Modem Software Overview
Included on the CD-ROM are the modem device drivers and Modem
Info user application software. These are contained within three CAB
files, which need to be installed on the iPAQ Pocket PC, namely:
DWiUART.ppc30_arm.CAB
DWiVDD.ppc30_arm.CAB
MSMQ.ppc30_arm.CAB
DWiUART.ppc30_arm.CAB
This CAB file contains the low level drivers that instantly create a
serial communications port to the non-rugged PRM240i modem upon
every iPAQ insertion into the modem sleeve. These drivers must be
installed to enable access to the non-rugged PRM240i modem for any
application software. This CAB file also contains a basic programmer's
interface for third party application developers who should refer to
document "DWI Modem Device Driver" (DWI10006WTxx) for
further information.
DWiVDD.ppc30_arm.CAB
This CAB file contains the non-rugged PRM240i Virtual Device
Driver, Port Server and Modem Info application.
Modem Info is a graphical user interface modem diagnostic and
information tool to enable you to:
Check the network connection status and modem parameters
Check the modem hardware and battery status
Set the various operating modes of the modem
Register third party applications for invocation on specific
modem events
Modem Info is supplied in both executable and source code form as an
example for iPAQ application developers to communicate with the
non-rugged PRM240i modem.
68P80802E60-O
13
Motorola
Advertisement
Table of Contents
