Table of Contents
Advertisement
VLAN Tutorials
Verify that all devices can ping each other before proceeding
Login to T2 via telnet or hyper-terminal,
From CLI type the following commands:
Enable and create VLANs, Enable QoS
network qos enable
vlan enable
vlan mode local-mode port-based remote-mode tag-based
system reboot
vlan add vlan-id 100
vlan add vlan-id 200
Assign the PVID for the WallPlate ports
vlan interface ingress port(1-25)-1 pvid 100
vlan interface ingress port(1-25)-2 pvid 200
Assign VLAN memberships to WallPlate ports
vlan membership add 100 interface port(1-25)-1
vlan membership add 200 interface port(1-25)-2
Configure QoS for high value service
network qos interface priority eth1 mode dynamic level low
network qos classification 802.1p
network qos interface egress wfq port1 queue critical weight 5
network qos interface egress wfq port1 queue high weight 175
network qos interface egress wfq port1 queue medium weight 50
network qos interface egress wfq port1 queue low weight 5
network qos multicast config queue-allocation high
Motorola, Inc.
549453-001-00-a
Page 40 of 51
Advertisement
Table of Contents
