Sony STR-DA5400ES Service Manual page 160

STR-DA5400ES
Pin No. Pin Name
PNX_ADC_LAT1,
159, 160
PNX_ADC_LAT2
161 GND
162 +5V
VIDEO UCOM
163
ENDFLAG
164 VIDEO UCOM MODE
165 RDS_CLK
166 VUCOM-BUSY
167 VUCOM-RST
168 FSRATE1
169 PNX RESET
170 232C-SEL2
171 XM-RESET
172 XM-DA_LAT
173 XM_POWER
174 DEV I2C SDA
175 DEV I2C SCL
176 +5V
160
I/O
O Not used
- Ground terminal
- Power supply terminal (+3.3V)
I End fl ag input from the video system controller
O Mode setting signal output to the video system controller
RDS serial data transfer clock signal input from the tuner (FM/AM)
I
(AEP, Continental European, East European, Russian and UK models only)
I Busy signal input from the video system controller
O Reset signal output to the video system controller
I L/R sampling clock signal input from the digital audio interface receiver or HDMI receiver
O Not used
O Data selection signal output terminal
O Reset signal output to the XM receiver
Serial data latch pulse signal output to the D/A converter (for XM section)
O
(US and Canadian models only)
Power supply on/off control signal output terminal for XM section
O
(US and Canadian models only)
I/O Two-way data bus with the EEPROM
O Serial data transfer clock signal output to the EEPROM
- Power supply terminal (+3.3V)
Description
"L": reset
"L": reset (US and Canadian models only)
"H": power on