Function 1: System Type - Honeywell RTH6350 Quick Installation Manual

Advanced Installation Guide

Function 1: System type

Press the or
s
of system you have in your home:
1
Done
0 Heating & cooling: Gas, oil or electric heating with
central air conditioning.
1 Heat pump: Outside compressor provides both heating
and cooling without backup or auxiliary heat.
2 Heating only: Gas, oil or electric heating without
central air conditioning.
3 Heating only with fan: Gas, oil or electric heating
without central air conditioning. (Use this setting if you
could turn the fan on and off with a fan switch on your
old thermostat.)
4 Cool only: Central air conditioning only.
5 Heat Pump: Outside compressor provides both heating
and cooling with backup or auxiliary heating.
6 Heat/Cool Multiple Stages: Two heat stages (wires on W
and W2), two cooling stages (wires on Y and Y2).
7 Heat/Cool Multiple Stages: Two heat stages (wires on
W and W2), one cooling
stage (wire on Y).
8 Heat/Cool Multiple
Stages: One heat stage
(wire on W), two cooling
stages (wires on Y and
Y2).
69-2696ES—03
button to select the type
t
0
Next
M28350
Press to change
setting. When
correct setting is
selected, press
NEXT to display
next function.
M28351
14