Playing Back Music Via Bluetooth; Registering A Bluetooth Device With The Unit (Pairing) - Yamaha NX-N500 Owner's Manual

Playing back music via Bluetooth

You can play back music files stored on a Bluetooth device (such as mobile device) on the unit.
• When you playing the Bluetooth device, set the WIRELESS switch on the rear panel to "AUTO" (p.7).

Registering a Bluetooth device with the unit (pairing)

1
Press (Bluetooth) on the remote control.
If no Bluetooth device has been registered yet, the status
indicator on the front panel flashes in blue.
2
Turn on the Bluetooth function on the Bluetooth
device.
The operation varies depending on the device. Refer to
the instruction manual supplied with the device.
24
En
(Bluetooth)
Blue (flashing)
3
Select "NX-N500 XXXXXX Bluetooth" in the
Bluetooth device list on the device.
Where "xxxxxx" represents the unique alphanumerics.
NX-N500 XXXXXX Bluetooth
• If this unit has been registered with the MusicCast CONTROLLER,
the room name entered during registration appears.
If or a connection completed message appears on the
paired device, pairing is finished.
When pairing is finished, the status indicator changes to
lit.
4
Playback a song on the Bluetooth device.
• Perform pairing with the Bluetooth device and unit within 10 m (33 ft) of
each other.
• This unit can be paired with a maximum total of 20 Bluetooth devices for
reception and transmission. When the 21st device is registered, the least
frequently used pairing information is deleted.
• If a Bluetooth device has been connected before, the unit will connect to
the last connected device when
Disconnect this connection to pair a new device (p.25).
• Refer to "Bluetooth" (p. 34) in "Troubleshooting" if paring is not possible.
Blue (lit)
(Bluetooh) is pressed with step 1.