Motorola Communications Gateway User Manual page 21

Introduction Before You Begin
Home Print
Installation & Configuration
Cabling and Startup for a Single User, continued
For safety and to prevent damage to the equipment, the Communications Gateway
is shipped with the battery wires disconnected. Do not short circuit the battery
terminals by simultaneously touching both terminals with a metal object.
12
Connect the black negative battery wire to the black negative (-) terminal on the
battery.
13
Connect the red positive battery wire to the red positive (+) terminal on the battery.
After you connect the battery, the Communications Gateway begins drawing power
but does not start.
X
Exit
Troubleshooting
16
Communications Gateway User Guide
FAQ Glossary
License