Motorola Communications Gateway User Manual page 19

Introduction Before You Begin
2
Battery snaps
Home Print
Installation & Configuration
Cabling and Startup for a Single User, continued
6
3
2
7
1
8
1
9
Battery hook
1
1
X
Exit
Troubleshooting
On the battery compartment cover, push in on the tabs, as shown by arrows 1 in the
illustration at top left.
Carefully remove the battery compartment cover by lifting up about 2 to 3 cm (1 inch)
and then pulling straight out. To avoid damaging the cover, be sure you rotate it only
slightly (arrow 2) before pulling it out (arrow 3).
For a description of the battery compartment, see
As shown at lower left, depress both battery snaps (arrows 1) while gently raising the
positive end of the battery (arrow 2).
When the battery rotates past the snaps, slide the battery out as shown below.
Be sure you do not damage the battery wires or terminals.
14
FAQ Glossary
"Battery Compartment"
Communications Gateway User Guide
License
on page 6.