Denon AVR-X4100W Owner's Manual page 225

Contents Connections
o Detailed settings when "Assign Mode" is set to
"Dolby Atmos"
When "Assign Mode" is set to "Dolby Atmos", set the following items.
n Layout
Select the speaker layout for Dolby Atmos playback.
This is a layout that adds the top middle
speakers to the 7.1 channel layout including
the surround back channel.
7.1ch + 2 Height:
Connect the top middle speaker to the
HEIGHT1 channel (left/right) pre-amp output
by using an external power amplifier.
This is a layout that adds the top front and
top rear speakers to the basic 5.1 channel
layout.
Connect the top front speakers to the
5.1ch + 4 Height:
HEIGHT1 speaker terminals, and connect
the top rear speakers to the HEIGHT2
channel (left/right) PRE OUT connectors by
using an external power amplifier.
This is a layout that adds the top middle
5.1ch + 2 Height speakers to the basic 5.1 channel layout.
(Default): Connect the top middle speakers to the
HEIGHT1 speaker terminals.
Front panel Display
Playback Settings
o View Terminal Config.
This shows how to connect the speaker terminals and PRE OUT
connectors for your "Amp Assign" setting on the menu screen.
Rear panel 225
Tips
Remote Index
Appendix