Inserting The Batteries - Denon AVR-X4100W Owner's Manual

Hide thumbs Also See for AVR-X4100W:
Table of Contents

Advertisement

Contents
Connections

Inserting the batteries

1
Slide the rear cover off the remote control unit in the
arrow direction.
.
2
Insert two batteries correctly into the battery
compartment as indicated.
R6P/AA batteries
.
3
Put the rear cover back on.
Front panel
Display
Playback
Settings
NOTE
0 To prevent damage or leakage of battery fluid:
0 Do not use a new battery together with an old one.
0 Do not use two different types of batteries.
0 Remove the batteries from the remote control unit if it will not be in use for long
periods.
0 If the battery fluid should leak, carefully wipe the fluid off the inside of the battery
compartment and insert new batteries.
Operating range of the remote control
unit
Point the remote control unit at the remote sensor when operating it.
Rear panel
10
Tips
Approx. 23 ft/7 m
30°
30°
.
Remote
Index
Appendix

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents