Safety Notice; Setting Up; Gps Reception; Sending Information To Tomtom - TomTom GO 4FB40 Reference Manual

Tip: To send your navigation device to sleep when the USB cable is unplugged or whenever it is
removed from the mount, go to Battery settings in the
Turning your device off completely
To turn off your navigation device completely, you can do one of the following:
Press and hold the On/Off button for more than 2 seconds until you see the Sleep and Turn Off

buttons. Select Turn Off to turn off the device. Select the "back" button if you don't want to
turn your device off.
Press and hold the On/Off button for more than 5 seconds until the device turns off.


Setting up

Note: The language you choose will be used for all text on the screen. You can always change the
language later in Language and Units
When you first switch on your TomTom GO, you have to answer a few questions to set it up. Answer
the questions by touching the screen.

GPS reception

When you first start your TomTom GO, it may need a few minutes to determine your position. In the
future, your position will be found much faster.
To ensure good satellite reception, use your GO outdoors and keep it upright. Large objects such as
tall buildings can sometimes interfere with reception.
Important: QuickGPSFix contains information about satellite positions which helps your GO find your
position faster. QuickGPSFix information is sent to Always Connected devices in real time and to
Smartphone Connected devices when connected to TomTom services using your smartphone. You
can also update QuickGPSFix using MyDrive.

Sending information to TomTom

When you first start navigating or you have reset your GO, your GO asks for permission to collect
some information about your use of the navigation device. The information is stored on your GO
until we retrieve it. We use it anonymously to improve our products and services. If you use our
services, we will also use your location information to deliver the services to you.
You can change whether you send this information to us at any time by doing the following:
1. In the Main Menu, select the Settings button.
2. Select System.
3. Select Your information.
4. Select the button to turn sending of information on or off.
Settings
in the Settings menu.
9
menu.