electrical connection a) If your appliance comes fitted with a plug, it will incorporate a 13 amp fuse. If it does not fit your socket, the plug should be cut off from the mains lead, and an appropriate plug fitted, as below. WarNING: Very carefully dispose of the cut off plug after removing the fuse: do not insert in a 13 amp socket el- sewhere in the house as this could cause a shock hazard.
Safety information Description of appliance Scalding hazard! a Selector dial failure to comply can be or is the cause of scalding or B Steam position burns. c “off ” position Please note: D “oN”/heating position This symbol highlights recommendations and important coffee/hot water dispensing position information for the user.
Check after delivery Scalding hazard! after removing the packaging, make sure the product is This appliance produces hot water and steam may form complete and undamaged and that all accessories are when it is operating. present. Do not use the appliance if it is visibly damaged. Take care not to come into contact with jets of hot water contact the customer experience Service.
regular cleaning espresso espresso x 300 x 300 maintenance...
Page 13
descaling de-scale every 200 coffees perform step 1 and 2 Step 1 Open x2 (x 2 sec.) 5 min repeat x3 ( g. 3-8)
Page 14
descaling Step 2 Open x2 (x 2 sec.) 5 min repeat...
Page 15
If something does not work… problem possible causes Solution espresso coffee does not flow out No water in the tank fill the water tank The holes in the filter-holder are blocked clean the holes in the filter-holder spouts The espresso boiler outlet is blocked carry out the cleaning operation as descibed in the paragraph headed “cleaning”...
Page 16
De’Longhi appliances via Seitz, 47 31100 Treviso Italia 5713214591 /06.10...