Signal Descriptions - Intel SSDPAMM0004G1 Product Manual

Table of Contents

Advertisement

Intel® Z-P230 PATA SSD
Table 11.
Intel Z-P230 with Mini PCIe Form Factor - 52 Pin Assignments
Pin Number
41
43
45
47
49
51
Note:
The Mini PCIe form factor does not use the DASP# or PDAIG signals.
5.2

Signal Descriptions

Table 12.
Signal Symbols and Descriptions
Symbol
CS0#, CS1#
DA[0...2]
DASP#
DIOR#
DIOW#
DMACK#
DMARQ
DNU
DQ[0...15]
GND
INTRQ
IORDY
NC
PDIAG#
Reserved
RESET#
VCC
September 2008
Order Number: 319955-003US
Signal
DA2
NC
NC
VCC
VCC
VCC
Type
The host uses CS0# to select task file registers and CS1# to select alternate
Input
status registers and other device control register.
Device address signals used by the host to access device registers or data
Input
port.
The Device Active/Slave Present signal.
Input/Output
Note: the Mini PCIe form factor does not use this signal.
The I/O Read Enable signal is the strobe signal asserted by the host to read
Input
device registers or the data port.
The I/O Write Enable signal is the strobe signal asserted by the host to write
Input
device registers or the data port.
The host uses the DMA Acknowledge signal to acknowledge the receipt of the
Input
DMA Request and that it is ready to initiate DMA transfers.
The DMA Request signal is asserted by the drive when it is ready for data
Output
transfer between it and the host. IORD and IOWR signals are used to control
the direction of data transfer.
Do Not Use. Must be left unconnected.
Input/Output
16-bit bidirectional I/O interface.
Supply
Ground connection.
Output
Device uses the Interrupt Request signal to interrupt the host.
The device asserts the I/O Ready signal to tell the host to extend the host
Output
transfer cycle.
Not connected.
The Pass Diagnostic signal is used by the master/slave handshake protocol to
determine if the device has passed diagnostics.
Input/Output
Note: the Mini PCIe form factor does not use this signal.
Reserved for Future Use.
Input
The host asserts this signal to reset the device.
Supply
Power supply.
Signal
Pin Number
IORDY
INTRRQ
CS0#
CS1#
GND
NC
Description
Intel® Z-P230 PATA Solid State Drive
42
44
46
48
50
52
Product Manual
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents