1060 Microphone - Lenovo TAB 2 A7-30F Hardware Maintenance Manual

1060 Microphone

For access, remove the following FRU:
• "1010 Rear cover and side key" on page 28
and
Detach the following FPC from the main board:
• Battery FPC (see Step 1 on page 30 to Step 3 on page 31 in "1020 Battery
pack")
• Antenna bracket (Lenovo TAB 2 A7-30H/HC only) (see Step 1 on page 38 and
Step 2 on page 39 in "1050 Antenna (Lenovo TAB 2 A7-30GC/H/HC)")
• Antenna PCB (Lenovo TAB 2 A7-30H/HC only) (see Step 4 on page 40 in
"1050 Antenna (Lenovo TAB 2 A7-30GC/H/HC)")
1. Desolder the wires of the microphone from their connecting points on the
main board at the position shown in the figure below.
Figure 6-1. Position for desoldering the wires of the microphone
Lenovo TAB 2 A7-30
43