1040 Speaker - Lenovo TAB 2 A7-30F Hardware Maintenance Manual

1040 Speaker

For access, remove the following FRUs:
• "1010 Rear cover and side key" on page 28
and
Detach the following FPC from the main board:
• Battery FPC (see Step 1 on page 30 to Step 3 on page 31 in "1020 Battery
pack")
1. Desolder the wires of the speaker from their connecting points on the main
board at the position shown in the figure below.
Figure 4-1. Position for desoldering the wires of the speaker (Lenovo TAB 2 A7-30GC/H/HC)
Figure 4-2. Position for desoldering the wires of the speaker (Lenovo TAB 2 A7-30F)
Lenovo TAB 2 A7-30
35