Leveling The Refrigerator; Re-Attaching The Fridge Door; Re-Attaching The Freezer Door; Re-Attaching The Water Supply Lines - Samsung RH25H5611SR User Manual

Z_ CAUTION
Do not remove the sensor assembly in the right
upper hinge cover.
Re-attaching the Fridge Door
To re-attach the fridge door, replace parts in
reverse order.
Re-attaching the Freezer Door
To re-attach the freezer door, replace parts in
reverse order.
Z_ CAUTION
Hook the wire on the Hinge Hook to prevent
damage to the wire when re-assembling.
Re-attaching the Water Supply Lines
1. The Water Lines must be fully Inserted into the
center of the transparent coupler to prevent
water leakage from the dispenser.
2. Insert the 2 clips in the install pack as shown
below, and then confirm that each clip holds
the line firmly.
Center of Transparent coupler
Z} ,,_
/_ ClipA (1/4")
(6.35 mm)
CAUTION
Make sure the color of the water lines match.
LEVELING THE REFRIGERATOR
The refrigerator must be level before you can make
final adjustments.
Use a level to test if the refrigerator is level both
side to side and back to front.
If the refrigerator is not level, you will not be able
to get the doors perfectly even, which may cause
moisture condensation and increased energy bills.
The front of the refrigerator is also
adjustable.
Before levelling the refrigerator, remove
the front leg cover.
Open both the freezer and refrigerator doors.
Unscrew the three screws holding the front leg
cover in place by turning them counter-clockwise.
When the screws are loose, remove the front leg
cover.
Engl sh - 14