Toyota 2001 MR2 Spyder Owner's Manual page 166

—After changing wheels
9. Check the air pressure of the re-
placed tire.
Adjust the air pressure to the specification
designated on page 201 in Section 8. If
the pressure is lower, drive slowly to the
nearest service station and fill to the cor-
rect pressure.
Do not forget to reinstall the tire inflation
valve cap as dirt and moisture could get
into the valve core and possibly cause air
leakage. If the cap is missing, have a new
one put on as soon as possible.
10. Restow all the tools, jack and flat
tire securely.
As soon as possible after
wheels, tighten the wheel nuts to the
torque specified on page 201 in Section
8 with a torque wrench. Have a technician
repair the flat tire and replace the com-
pact spare tire with it.
144
CAUTION
Before driving, make sure all
tools, jack and flat tire are securely
in place in their storage location to
reduce the possibility of personal in-
jury during a collision or sudden
braking.
changing
2001 MR2 (OM17482U)
01MY MR2(U) L/O 0008
the
SB41025
Remove the wheel ornament from the flat
tire before restowing the flat tire.