Toyota 2001 MR2 Spyder Owner's Manual page 138

Discharged battery
SB41055
Positive
terminal
Jumper
Positive terminal
( "+" mark)
cable
( "+" mark)
4. Make the cable connections in the or-
der a, b, c, d.
a. Connect the clamp of the positive
(red) jumper cable to the positive (+)
terminal on the discharged battery.
b. Connect the clamp at the other end
of the positive (red) jumper cable to
the positive (+) terminal on the booster
battery.
152
Booster
battery
SB41056
Discharged
battery
Booster
battery
c. Connect the clamp of the negative
(black) jumper cable to the negative (- )
terminal on the booster battery.
d. Connect the clamp at the other end
of the negative (black) jumper cable to
a solid, stationary, unpainted, metallic
point of the vehicle with the discharged
battery.
The recommended connecting point is
shown in the following illustration:
2001 MR2 (OM17482U)
01MY MR2(U) L/O 0008
Jumper cable
Negative terminal
( "- " mark)
Connecting point
Do not connect the cable to or near
any part that moves when the engine
is cranked.
When
avoid serious injury, do not lean over
the battery or accidentally let the
jumper cables or clamps touch any-
thing except the correct battery termi-
nals or the ground.
SB41040
CAUTION
making the connections, to