User Settings - Motorola DCT6400 Series User Manual

User Settings

Setting Description
TV Type Sets the aspect ratio. The LED panel displays the type you
select. Defaults to 16:9. Options are 16:9 for wide screen
TVs or 4:3 LETTERBOX or 4:3 PAN/SCAN for standard
TVs:
4:3 LETTERBOX fits widescreen programming on the
screen by placing black bars at the top and bottom.
4:3 PAN/SCAN fills the screen by cropping the left and
right edges of widescreen programming.
DVI/YPbPr Sets the video display format for the component video
Output
outputs. The LED panel displays the format you select.
Defaults to 1080i. Options are 1080i, 720p, 480p, or 480i.
Some TVs only support certain display formats. Check your
TV user manual for more information.
If you are not using an HDTV with the DCT*, selecting a
format other than 480i causes the on-screen display to go
blank. If this occurs, you can view the settings on the LED
panel to change the YPbPr Output back to 480i.
If you are not using the DVI video connection, the
DVI/YPbPr OUTPUT setting displays as YPbPr OUTPUT.
DCT6400 Series User Guide
11