Preparing A Beverage - DeLonghi MELODY 3 User Manual

PR EPA RI N G A B E V E R A G E
1
ON
Switch machine on. While machine is heating
up, power button starts blinking red. After ap-
prox. 30 seconds, power button lights steady
green and machine is ready.
4
LUNGO
Use the selector wheel to illuminate the bars
in accordance with the number of bars shown
on capsule, or set the bar display to your own
taste.
7
Take cup from drip tray. Open the locking
handle.
2
30 sec
Adjust drip tray position according to the
chosen beverage (see page 4-5). Place cup on
drip tray.
5
Press hot or cold water button (depending on
beverage). Beverage preparation starts.
Bar display lights vanish progressively.
Machine stops preparation automatically.
8
Pull out capsule holder and remove used cap-
sule. Put used capsule in capsule bin.
3
Open locking handle and pull out capsule
holder. Insert capsule in capsule holder and
insert it back in machine. Close locking handle.
6
After fi nishing preparation, bar display fl ashes
and power button blinks red for about 5
seconds.
During that time do not open the locking
handle!
9
Rinse and dry capsule holder with water from
both sides. Insert capsule holder to machine.
Enjoy your beverage!
7
5 sec