Advertisement
PRODUCT FEATURES:
Fig 1
Power
Radio
Alarm 1
Tuner
INSTRUCTIONS FOR USE:
1. Unpack the unit carefully. Remove all the accessories from the carton. Do not
remove any labels or stickers on the bottom of the unit or adapter. Before
setting up the unit, verify that the following contents are present:
• Sound Spa Auto Set Clock Radio x 1
• AC Adapter and power cord x 1
Power Source
This unit is supplied with an AC adapter; take the following steps to connect
the adaptor.
1. Unwind the power cord of the AC adaptor to its full length.
2. Connect the AC adapter to the DC5V Input.
3. Plug the AC adapter into an outlet (220V).
4. To power the unit off completely, unplug the AC adapter from the wall outlet.
NOTE: Connecting this system to any other power source may cause damage to
the system. For sufficient ventilation, keep other objects at least 4 inches away
from the unit.
Setting Clock Time
Press and hold (3 seconds) the TIME SET button on back of unit (Fig. 2), the hour
will begin to flash. Select the hour using the VOLUME buttons on the top to
adjust the hour (when in 12 hour mode remember to set correct AM/PM, a "PM"
icon will be displayed) (Fig. 1), press TIME SET button again to select the minute
using the VOLUME buttons on top again to adjust. Press TIME SET button again,
now time is set.
NOTE: After time is set, press TIME SET button again and use the VOLUME button
to select 12 or 24 hour format.
Setting and Using the Alarms
Setting Alarm 1 or Alarm 2
1. Press and hold (3 seconds) the desired alarm button (ALARM 1 or ALARM 2)
located on the top of the unit to activate the alarm set feature. (Fig. 1)
2. Press and hold the ALARM button again and the hour will begin flashing.
3. Use the TUNER button (or the volume up/down button) on top of the unit to
adjust the hour, paying attention to the AM and PM indicators (when in 12
hour mode).
4. Press the ALARM button again and the minute will begin flashing. Use TUNER
button again to adjust the minute.
5. Press the ALARM button again to select the source. The alarm can be set to
Sounds
Alarm 2
Volume
Snooze/Dim/Sleep
6. Press ALARM button again to adjust the maximum volume of the gradual
7. Press the ALARM button a final time, the alarm is now set.
Turning Off The Alarm / Snooze Operation
The Sound Spa is equipped with gradual wake, which means that the alarm
begins soft and slowly gets louder. This will ensure a non-jarring wake-up.
• After the alarm sounds, press the SNOOZE bar located on the top of the unit
NOTE: You may only press the SNOOZE button during the ALARM mode for one
hour (7 times). After the seventh time, the alarm will turn off and will not sound
again until the next set time.
• To turn off the alarm, press any button (except the SNOOZE/DIM/SLEEP button)
Listening to the Radio
NOTE: For best reception, fully unwind the wire antenna. DO NOT strip, alter or
attach to other antennas.
1. To listen to the radio, press the POWER button located on top of the unit.
2. Press the RADIO button on the unit until FM icon and station frequency
3. Use the TUNER selector button on the top of the unit to select desired station.
4. Press the POWER button to turn radio off.
Sounds
1. To listen to the Nature Sounds, press the POWER button on the top of the unit.
2. Press the SOUND button to scroll through the sounds.
3. Your sound selection will illuminate on the LCD screen.
Sleep Feature
While listening to the radio press the SNOOZE/DIM/SLEEP button to activate the
sleep feature. This allows you to set a sleep timer for 15, 30, 45, and 60 minutes.
Once set, the unit will continue playing for the set length of time, then will
automatically turn off.
3
Fig 2
TIme Set
DC5V
Time set
Adaptor input
Adaptor
sound a Beep, Nature Sounds or play the FM radio. Select using the TUNER
button.
wake feature (alarm begins soft and slowly gets louder) by using the TUNER
buttons to adjust the sound level up or down.
and the alarm will sound again after nine minutes.
on the top of the unit.
appears on the display.
For auto seek press and hold TUNER selector for 2 seconds then release and
the tuner will find the next station with a signal.
Projector
Projector
Projector On/Off button
Hide quick links:
Advertisement
