Using The Handset As A Walkie Talkie; Monitoring A Room - Motorola MD450 Series User Manual

Using the Handset as a Walkie
Talkie
The walkie talkie feature lets you talk handset to
handset even when the handsets are out of range
from the base station. When a handset is in walkie
talkie mode, you cannot make or receive phone calls
You must complete steps 1 and 2 for both handsets
to use walkie-talkie mode.
Action
1 Press ( ).
a
2 Scroll to
( ).
a
3 Press Intercom on one of the handsets.
4 Press the number on the handset keypad
that corresponds to the handset you want to
use walkie talkie with.
For example, if the handset you want to talk
to is named Kitchen(2), press 2 on the
keypad.
5 To answer the page on the other handset,
press ( ).
a
6 To end the walkie talkie session, press
( ) on either handset.
a
and press
41

Monitoring a Room

Room monitoring allows you to place a handset in a
room and listen to the sounds in that room from
another handset.
Action
1 Place a handset in the room to be
monitored.
2 On that handset, press
3 Scroll to
( ). The display shows
a
4 On the handset you want to listen from,
press Intercom. The display lists the
handsets registered to the base station.
Note: If there are only 2 handsets registered
to the base, pressing the Intercom button
will automatically page the other handset.
5 Scroll to the handset you set up monitoring
on and press
The handset that was set up for monitoring
automatically answers the page. The microphone on
that handset is turned on, and the speaker is turned
off. The handset you are monitoring from shows
( handset name ).
To turn off monitoring, press
on either handset.
Note: If you answer an incoming call, monitoring is
turned off.
42
( ).
a
and press
.
( ).
a
( ) or OFF
a