Operating Your Radio; Power On/Off And Volume; Transmitting And Receiving A Call; About Range - Midland X-Talker T50 Series Owner's Manual

Model T50 Series

OPERATING YOUR RADIO

POWER ON/OFF AND VOLUME

Press the POWER/MENU button for at least 3 seconds to turn the
radio on/off. During Power On, the radio will beep 2 times with
different tones, the LCD will display several icons for 1 second and
then the LCD display will indicate the last channel selected.
To increase/decrease the volume level, press the
during RX or STANDBY mode
RESTORING YOUR RADIO TO THE ORIGINAL SETTING
To reset your radio to the original (default) setting, turn on the radio
while pressing and holding the
to standby mode on channel 1 with no Privacy Code.

TRANSMITTING AND RECEIVING A CALL

To communicate, all radios in your group must be set to the same
channel and/or Privacy Code.
1. For maximum clarity, hold the radio 2 to 3 inches from your
mouth.
2. Press and hold the PTT button and speak in a normal voice into
the microphone. The TX icon will appear continuously on the
LCD display while transmitting.
3. To receive a call, release the PTT button. The RX icon will appear
on the display when your radio is receiving a transmission.

ABOUT RANGE

Your radios are designed to give you maximum range under optimum
conditions.
Page 7
L L
button. The LCD display will reset
L L \M M
buttons
midlandusa.com