Declaration Of Conformance; Connecting To A Switchboard; Inserting A Pause; Recall - Motorola DIGITAL CORDLESS PHONE D210 User Manual

Allegro_CID TAD.book Page 29 Tuesday, January 15, 2008 4:30 PM

Declaration of Conformance

Hereby, Motorola declares that this telephone is in compliance
with the essential requirements and other relevant provisions
of Directive 1999/5/EC.
The Declaration of Conformance for this telephone is
published on the website: http://www.motorola.com/eu/
radios/technicaldocumentation

Connecting to a switchboard

This product is intended for use within the European Union for
connection to the public telephone network and compatible
switchboards, which support tone and pulse dialling and timed
break recall. If in doubt please consult your service provider.

Inserting a pause

With some switchboards, after dialling the access code you
may have to wait for a moment while the switchboard picks up
an outside line so you will need to enter a pause in the dialling
sequence.
Press and hold Spkr/Pause button to insert a pause (P) before
entering the telephone number.
You may also need to enter a pause when storing international
numbers or charge card numbers.

Recall

You may need to use the recall function if you are connected
to a switchboard/PBX (Private Branch Exchange). Contact your
PBX supplier for further information.
29