Handset Label; Base Ringer Volume; Base Ringer Type; Call Barring - Motorola DIGITAL CORDLESS PHONE D210 User Manual

Allegro_CID TAD.book Page 19 Tuesday, January 15, 2008 4:30 PM

Handset Label

You can change the name your phone displays on the screen.
If you have more than one handset, you can use the name to
identify your handset.
1. Press to access the main menu.
to select "HS SETTINGS" and press
2. Press or
to select "HS LABEL". Press
3. Press or
4. Enter the name using the number keypad (up to 6
characters). Press to confirm.

Base ringer volume

There are 5 volume levels to choose from or you can select
volume Off.
1. Press to access the main menu.
to select "BS SETTINGS" and press
2. Press or
to select "RING SETUP" and press
3. Press or
until "BS VOLUME" is displayed and press
4. Press or
5. Press or to select the volume you want (you will hear
a sample of each as you scroll through), and press
confirm.

Base ringer type

There are 5 base ringer melodies to choose from.
1. Press to access the main menu.
to select "BS SETTINGS" and press
2. Press or
to select "RING SETUP" and press
3. Press or
4. Press or
5. Press or
a sample of each as you scroll through), and press
confirm.

Call barring

.
When switched on, Call Barring prevents external calls being
.
made.
1. Press
2. Press or
3. Press or
4. "PIN ?" is displayed. Enter the PIN code using the number
keypad. Press
5. Press or
.

11. Settings menu

.
.

Tones

You can switch on or off the tones for key touch, battery low,
and out-of-range alarm.
to
For example, when the key tone is set to ON, you will hear a
tone each time you press a keypad button.
1. Press
2. Press or
3. Press or
.
4. Press or
.
to select "BS MELODY" and press
to select the melody you want. (you will hear
to access the main menu.
to select "HS SETTINGS". Press
to select "BARRING". Press .
.
to select "ON" or "OFF". Press
to access the main menu.
to select "HS SETTINGS". Press
to select "TONE SETUP". Press
to select the option you want
.
to
.
to confirm.
.
.
19