SA-AK250GCP
Step 4 Lift the CD changer unit upwards to remove it.
· Disassembly of Mecha Chassis
10.6. Disassembly of Rear Panel
· Follow the (Step 1) - (Step 5) of Item 10.4
Step 1 Remove 9 screws.
Step 2 Detach cable at connector CN2810 on Main P.C.B..
Step 3 Detach FFC cables at connectors (CN2801 & CN2805)
on Main P.C.B..
Step 5 Remove 2 screws.
Step 6 Remove the Mecha Chassis.
Note:
For disassembly & assembly of traverse unit, please refer to
section 10.15 of this service manual. Please refer to original
Service Manual for the Disassembly and Assembly of the CD
Changer Unit (CRS1).
Step 4 Remove rear panel.
30