Table of Contents
Advertisement
13.Allow the overflowing oil to escape at the
hole "a" in the damper assembly.
14.Check:
• Damper assembly smooth movement
Tightness/binding/rough spots → Repeat
the steps 2 to 13.
15.Install:
• Dust seal "1"
• Stopper ring "2"
• Oil seal "3"
• Oil seal washer "4"
• Slide metal "5"
To inner tube "6".
• Apply the fork oil on the inner tube.
• When installing the oil seal, use vinyl seat "a"
with fork oil applied to protect the oil seal lip.
• Install the oil seal with its manufacture's
marks or number facing the axle holder side.
16.Install:
• Piston metal "1"
Install the piston metal onto the slot on inner
tube.
17.Install:
• Outer tube "1"
To inner tube "2".
5-30
FRONT FORK
Advertisement
Table of Contents
