LG LMCN077HV Installation Manual page 29

F
MULTI
F
MULTI MAX
Examples of Supports
Figure 29: U-Bolt Support with Insulation.
Bolt
1.5t
Plate
Note:
Do not compress the insulation with the saddle-type support. If the insulation is compressed, it may tear open and allow condensation to
generate during product operation.
Figure 32: U-Bolt Support with an Insulated Pipe.
To prevent
insulation from
pressing and
lagging, use a cover.
Sheathing
Figure 34: One-Point Down-Stop Support (>441 lbs.).
Plate Nut
Hexagonal Nut
GENERAL INSTALLATION GUIDELINES
Figure 30: O-Ring Support with Insulation.
Insulation
PVC
Figure 33: O-Ring Band Support with an Insulated Pipe.
Figure 35: Two-Point Down-Stop Support.
O-ring Band
Welding
Insulated
Support Band
Down Stop
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Bolt
PVC
O-Ring
Band
Lags
Sheathing
Welding
Insulated
Support Band
Refrigerant Pipe
Refrigerant Piping
Figure 31: Saddle-Type Support.
Support at Intervals Between 5 and 6-3/4 Feet
29