Remote Control Installation - Carrier 53QPCT18H-708F Installation Manual

14. REMOTE CONTROL INSTALLATION

14-1 HOW TO INSERT BATTERIES:
(a) Remove the cover of battery
compartment at the back of the
remote control by pressing the
tab toward outside, in the direction
of the arrow.
(b) Mount two batteries size AAA 1.5 Volt supplied
with the remote control. Then close the cover
of the battery component.
Note:
During mounting of batteries
check battery symbols (+, -)
indicated in batteries
compartment.
NOTES
1. The remote control uses two alkaline batteries (1.5 Volts) .
2. Do not use old batteries or batteries of different types, as this may cause the remote control
to malfunction.
3. If you do not use the remote control for more than a few weeks, please remove the batteries.
Other wise battery leakage may damage the remote control.
4. The average battery life during normal use is approximately half a year.
5. Replace the batteries when there is no receiving beep coming from the indoor unit or transmission
indicator on the remote control fails to light.
6. Batteries should only be replaced after turning OFF the air conditioner.
(c) Press the button (at the front of remote
control) with an object not sharp to operate
the remote control.
20